FAQsUpdated 9 days ago
What’s included with the M1?
The M1 includes a main base, a main upright, a top beam assembly, guide rods, a weight stack with weight plates, a seat frame, a back pad, a seat pad, a shroud, and cables with pulleys. It also includes four short D-handles and two multi D-ring handles. The manual’s parts and hardware list shows the full contents. Accessories are sold separately, including a 50 lb heavy stack, a revolving lat bar, a revolving EZ curl bar, and an ankle strap.
How much weight does the M1 provide?
The weight stack uses weight plates and a top weight. The manual notes that you can configure a 200 lb stack by removing the weight stack risers. Make sure the weight pin is fully inserted before you train.
How much space do I need?
Keep the M1 away from walls and clear of any obstructions and furniture. Keep bystanders at least 5 feet away while it’s in use. We recommend placing a rubber mat underneath to protect wood flooring or carpet during assembly and use.
What tools do I need for assembly?
You’ll need a standard socket set with 13 mm, 16 mm, and 17 mm sockets, along with 13 mm, 16 mm, 17 mm, and 19 mm wrenches. You’ll also need an adjustable wrench, a tape measure, and a rubber mallet. The 5 mm and 6 mm Allen wrenches come with the machine.
How do I assemble the M1?
Assembly takes 18 steps. Two people are required to complete steps 1 through 4 so the frame doesn’t fall. Most steps say not to tighten the hardware until you reach the step that tells you to. Follow the steps in order, and tighten all the hardware from steps 1 through 10 once you finish step 10. Route the upper cable and the lower cables carefully through the pulleys, making sure each cable sits in the correct pulley groove. In step 18, attach the D-handle straps to the cable ends with spring clips.
How do I adjust the seat?
Tighten the seat frame bolts, then loosen the nuts by half a turn. If the seat binds and is hard to adjust, loosen the nuts a little more. The bolts should not be so loose that the seat moves unsafely.
How do I adjust the cable tension?
Cables stretch over time, so check the slack periodically. The manual’s maintenance section refers to a step for adjusting tension, but the assembly instructions only go through step 18. For help adjusting tension, contact our support team.
What safety precautions should I follow?
Read the entire manual and familiarize yourself with all decals and warnings before using the machine. Inspect it regularly, and replace any worn or defective parts right away. Pay special attention to the cables, pulleys, and connections to accessories. Use the machine only for its intended purpose, and don’t use attachments the manufacturer doesn’t recommend. Keep children off the machine at all times. Keep your hands clear of the pinch points marked on the machine. Consult your doctor before starting any exercise program. Stop immediately if you experience shortness of breath, pain, or dizziness. Warm up before you train, control the weight through the full range of motion, and don’t hold your breath during each set.
Can I use the M1 outdoors or in a garage?
No. The M1 is for indoor use only. Garages and screened-in porches aren’t recommended because of high humidity and dust. Humidity can cause rust on parts such as the guide rods, which can affect how the machine works. Don’t use or store it outdoors.
How do I maintain the M1?
Every week, inspect the links, pull pins, spring clips, swivels, and weight stack pins, along with the cables and their fittings and the tautness of the shrouds. Clean the upholstery weekly. Every three months, inspect the accessory bars and handles, decals, and anti-skid surfaces, and tighten any loose nuts and bolts. Clean and lubricate the guide rods with a Teflon-based lubricant, and lubricate the seat sleeves and plastic slides. Wax the glossy finishes once a year. Replace cables, belts, and connecting parts every two years. Inspect the cables for splitting, cracking, fraying, or flat spots, and replace any cable at the first sign of damage.
How do I care for the seat pads?
Don’t place styrofoam or printed materials on the orthopedic seat pads, since they can stick to the surface. Don’t leave items on the pads, because they can leave lasting imprints. Replace any damaged or worn upholstery right away.
What warranty comes with the M1?
The manual describes an in-home lifetime warranty for the original purchaser, covering defects in materials and workmanship under normal non-commercial, household use. The warranty isn’t transferable to a new owner. You’ll need your sales receipt, which shows the purchase date, model, and serial number. Warranty parts must be returned in their original container, and you’re responsible for prepaying shipping. Service should only be performed by an authorized retailer, since service by anyone else can void your warranty. The machine is labeled as not designed for commercial use.
Where can I get replacement parts?
Because the M1 is discontinued, parts availability may be limited. Contact our support team with your machine’s serial number and the name of the part you need, and they can check what’s available. Use only genuine Inspire parts, since other parts can void your warranty and could cause injury.
Still need help?
Reach out to us at [email protected] and our team will be happy to help.