FAQsUpdated 9 days ago
What comes with the CG3.1PK?
The CG3.1PK includes a triceps rope, a curl bar, a straight bar, two two-ring D-handles, a chin/dip belt, and 20 weight plates of 10 lbs each. You’ll also get weight stack stickers, rubber bumpers, a tube of lubricant, and black touch-up paint.
How much weight is included?
Each side of the machine holds ten 10 lb weight plates. The manual doesn’t list a total weight capacity, so please check with our support team if you need that number.
Can I add more weight?
Yes. Our support team has confirmed that the CG3 is compatible with a 50 lb weight stack upgrade. You’ll need to remove the existing weight stacks before adding the new weights. Contact our support team to order the upgrade and get installation guidance.
How do I adjust the pulley height?
Lift the adjustment handle on the pulley carriage and slide the carriage up or down to the level you want. Release the handle to lock the carriage in place.
How do I adjust the cable tension?
Loosen the M10 x 50 mm bolt on the top plate assembly, then turn the tension adjustment plate clockwise or counterclockwise to raise or lower the pulley. Once the cable is at the right tension, tighten the bolt. If you’re not sure about the cable path, contact our support team. They can connect you with a specialist.
How long does assembly take, and do I need help?
Two or more people are required for assembly, and you shouldn’t attempt it alone. Follow the four assembly steps in the manual, and don’t fully tighten the hardware until the manual tells you to. Check that the cables sit on track on the pulleys before you finish. You’ll need an adjustable wrench and 4, 5, and 6 mm Allen wrenches. The hardware kit includes some of the wrenches.
What safety precautions should I follow?
Keep children and pets away from the machine at all times, and don’t leave children unattended in the same room. Only one person should use the machine at a time. Position it on a clear, level surface, and keep your hands away from moving parts. A spotter is recommended during exercise. Always warm up before you train, and wear running or training shoes and clothing that won’t catch on the machine. Disabled persons should only use the machine with a qualified person or physician in attendance. Consult a physician before starting any exercise program. If you feel dizzy, nauseous, or have chest pain, stop right away and consult a physician. Never use the machine if it isn’t functioning properly.
Can I use the CG3.1PK outdoors?
No. The CG3.1PK is intended for indoor, home use only. Don’t use or store it outdoors. Humidity can cause rust on parts such as the guide rods, which can affect how the machine works.
How do I maintain the CG3.1PK?
Inspect the cables for splitting, cracking, fraying, or flat spots, paying close attention to the ends. Replace cables at the first sign of damage or wear, and never use the machine with damaged cables. Cables stretch over time, so check their slack and adjust tension as needed. Regularly check for loose hardware, and inspect the snap links, swivels, handles, and weight stack pins for wear. Replace any worn parts right away. Wipe the guide rods with a dry cloth and reapply a thin coat of Teflon-based lubricant every few months. Clean the upholstery weekly, and check the decals and nuts and bolts every three months. Replace cables, belts, and connecting parts every two years.
How much do replacement cables cost?
Replacement cables are $40 each, plus shipping. If your machine is covered under warranty, our support team may cover the cost of the parts, though you would still pay shipping. Stop using the machine if a cable is damaged, and contact our support team to order a replacement.
Does the CG3.1PK include a Centr membership?
Yes, your CG3.1PK includes a free 3-month Centr membership. Redeem it using the instructions that come with your machine. If your code says it’s already been claimed, contact our support team, and they can issue a new code.
What warranty comes with the CG3.1PK?
You can register your machine and view full warranty details at inspirefitness.com/support. Service must be performed by an authorized Inspire retailer, since service by anyone else can void your warranty. To file a warranty claim, have your serial number, purchase date, and a copy or photo of your purchase receipt ready. Your serial number begins with CG3.1PK, and you’ll find it on the machine’s label. The front page of the manual also has space to record it.
Still need help?
Reach out to us at [email protected] and our team will be happy to help.